Datasheet

05 | Keysight | N2870A Series Passive Probes and Accessories - Data Sheet
Variety of Connections (Continued)
Use the optional accessory kits to provide
access to signals and components that are
difficult to probe.
Figure 6. With today’s miniature IC- and component-packaging techniques, probing can be a
considerable challenge. Use 0.5 mm QFP IC clips with TQFP/PQFP packages with 0.5 mm lead
pitch or greater, or use pico-hook clips made for connections over components or wires with leads
up to 0.04” diameter or smaller.
Figure 7. The dual lead adapter allows you to easily connect the N2870A Series probe to a popular
0.1” pin header with 0.025” square pins. This dual lead adapter has no shorting hazards since all
external metal surfaces are insulated.