Datasheet

02 | Keysight | N2795A/96A/97A Single-ended Active Probes - Data Sheet
N2795A/96A active probe with
standard accessories
N2797A with standard accessories
Key Features
– High resistance (1MΩ) and low capacitance (1 pF)
input for low loading
– Wide input dynamic range (±8V) and offset range
(±12V for N2796A/97A, ±8V for N2795A)
– Built-in headlight for better visibility while probing
– Includes various probe tip accessories
– Direct connection to AutoProbe interface (no power
supply required)
– Provides full system bandwidth with InniiVision and Inniium
oscilloscopes with bandwidths up to 1 GHz
– N2797A for extreme temperature environmental
chamber testing at –40 to +85 °C
The N2795A/96A are low-cost, 1 and 2 GHz single-ended active
probes with the AutoProbe interface (compatible with the Keysight
Technologies, Inc. InniVision and Inniium family of oscilloscopes).
These probes integrate many of the characteristics needed for
today’s general-purpose, high-speed probing - especially in
digital system design, component design/characterization, and
educational research applications. Its 1MΩ input resistance and
extremely low input capacitance (1 pF) provide ultra low loading
of the DUT. This, accompanied with superior signal delity, makes
these probes useful for most of today’s digital logic voltages. And
with their wide dynamic range (±8 V) and offset range (±12 V for
N2796A/97A, ±8 V for N2795A), these probes can be used in a wide
variety of applications.
For high signal integrity probing, the N2795A 1 GHz and N2796A 2
GHz active probes are perfect complements to Keysight’s 500 MHz
– 600 MHz and 1 GHz bandwidth scopes, respectively. The N2796A
2 GHz probe can also be used with Keysight’s 2 GHz or higher
bandwidth Inniium scope as a low cost alternative to InniiMax
probes.
Testing devices over extreme temperature ranges is quite common
these days. The N2797A single-ended active probe is the industry’s
rst low-cost high input impedance active probe with rugged probe
tips for environmental chamber testing of ICs and devices. The probe
gives the ability to probe signals at drastic temperature swings ranging
from –40 to +85 °C. The probe provides 1.5 GHz of bandwidth and a
2 m long cable.
The N2795A/96A/97A are equipped with a pleasant white LED
headlight to illuminate the circuit under test. The probes are pow-
ered directly by the InniiVision and Inniium Autoprobe interface,
eliminating the need for an additional power supply. The probes
also come with a number of accessories that allow for easy connec-
tions to the circuit under test.