Datasheet
08 | Keysight | N2792A/N2818A 200 MHz and N2793A/N2819A 800 MHz Differential Probes - Data Sheet
Figure 18. The N7013A extreme temperature probing kit for differential probes
When probing differential signals inside of environmental
chambers at extreme temperatures, Keysight offers the N7013A
extreme temperature extension kit shown in Figure 18. The
N7013A is compatible with the N2792A and N2818A differential
probes at de-rated bandwidths. The 70 cm long differential cable
set and accessories can operate in temperatures ranging from
-40 degrees to +85 degree Celsius. Note that the N7013A is not
compatible with the N2793A and N2819A.
Ordering Information
Product number Description
N2792A 200 MHz differential probe
N2792-68700 Differential probe accessory kit for N2818A/N2792A (including 2 each clip hook, 2 each alligator clip and USB power cord)
N2793A 800 MHz differential probe
N2793-68700 Differential probe accessory kit for N2819A/N2793A (including 2 each pincer clip, 2 each micro IC clip, 2 each extension lead
0.8 mm J-P 5 cm, 2 each extension lead 0.8 mm J-P 10 cm, 2 dual signal pins 16.8 mm, 2 dual signal pins 12.8 mm, 2 variable
pitch spacing adapters, 2 DC blocking capacitors, 6 single signal pins 0.8 mm, USB power cord)
N2818A 200 MHz differential probe with AutoProbe interface
N2819A 800 MHz differential probe with AutoProbe interface
N4853A Variable pitch browser for N2793A/N2819A, qty 2
N4854A DC blocking caps for N2793A/N2819A, qty 2
N7013A Extreme temperature probe kit for the N2792 and N2818A
N7014A Banana-to-socketed adapters (1 pair) for N2792A/N2818A for connecting to 0.025” square pins (headers)
0960-2926 CAN/CAN FD/FlexRay DB9 probe head for N2792A/N2818A
0960-2927 CAN/CAN FD/FlexRay DB9 probe head for N2793A/N2819A
Performance Characteristics and Specications
(continued)
Characteristics N2792A/N2818A N2793A/N2819A
Standard accessories – 2 hook clips (black and red)
– 2 alligator clips (black and red)
– 1 screw driver for offset adjustment
– For N2792A only:
– USB power cord (2m)
– 9V battery
– user’s guide
– 2 pincer clips (black and red)
– 2 micro IC clips (black and red)
– 2 extension leads, 0.8 mm J-P, 5 cm (black and red)
– 2 extension leads, 0.8 mm J-P, 10 cm (black and red)
– 2 DC blocking capacitors (30 kHz - 1 GHz, 100V max)
– 2 variable pitch spacing adapters
– 6 single signal pins, 0.8 mm
– 1 screw driver for offset adjustment
– For N2793A only:
– USB power cord (2m)
– 9V battery
– user’s guide
Regulatory markings CEI/IEC61010-031 CAT II CEI/IEC61010-031 CAT II