Datasheet

Page 2
Find us at www.keysight.com
Measurement Versatility
These probes integrate many of the
features and characteristics needed for
today’s general-purpose, high-speed
differential probing - especially in digital
system design, component design/
characterization, and differential serial
bus measurements. The N2750A Series
differential probes offer 2:1 and 10:1 dual
attenuation settings, allowing them to be
used for a broad range of applications.
Dual attenuation range is automatically
congured depending on the size of the
input signal.
The new differential probes have an input
resistance of 200 kΩ (differential) or 100 kΩ
(each input to ground) and an extremely
low input capacitance of 700 fF to minimize
circuit loading. This, accompanied with
superior signal delity, makes these probes
useful for most digital design and debug
applications. And with their wide dynamic
range (10 Vpp) and offset range (± 15 V),
these probes can be used in a wide variety
of analog signal measurements as well.
Key Features
Measurement versatility
– 1.5 GHz, 3.5 GHz, and 6 GHz probe
bandwidth models
– Dual attenuation ratio (2:1/10:1)
– High input resistance (200 kΩ
differential, 100 kΩ single-ended)
– Wide input dynamic range (10 Vpp)
– Wide offset range (± 15 V)
– High CMRR (>60 dB at 1 MHz)
Superb usability
– InniiMode probing for making
differential, single-ended and
common mode measurements with a
single probe
– Built-in multi-function scope control
for quick access to a variety of scope
functions
– Built-in “Headlight” to see where you
are probing
– Includes solder-in, browser, and
socketed tips standard
– AutoProbe interface for auto
conguration and probe power
At affordable prices
The N2750A Series InniiMode differential
probes are a new generation of low-cost,
1.5 GHz, 3.5 GHz, and 6 GHz differential
active probes compatible with the Keysight
Technologies, Inc. InniiVision and Inniium
oscilloscopes’ AutoProbe interface.