Datasheet
03 | Keysight | DSOXT3NFC/DSOX4NFC Automated NFC Test Software, N2116A/N2134A/N2135A Programmable NFC 3-in-1 Antenna - Data Sheet
Keysight’s DSOXT3NFC/DSOX4NFC automated NFC test software guides you through the
process of selecting and configuring tests, making oscilloscope connections, running tests, and
evaluating the test results. This software:
– Allows you to select individual or multiple tests to run.
– Shows you how to make connections to the test equipment and device under test (DUT)
based on a selected connection type.
– Automatically checks for proper test equipment configuration.
– Automatically sets up the equipment for each test.
– Provides detailed information for each test that has been run and lets you specify the
thresholds at which marginal or critical warnings appear.
– Creates a printable HTML report of the tests that have been run.
The complete Keysight automated NFC test system for manufacturing test and design
validation (Figure 2) consists of the following four components:
1. Keysight DSOXT3NFC or DSOX4NFC PC-based software
2. Keysight 3000T or 4000 X-Series InniiVision oscilloscope
3. Keysight 33500 or 33600 Series Trueform waveform generator
4. Keysight N2116A/N2134A/N2135A 3-in-1 programmable NFC antenna (Poller, Listener,
and Resonant Frequency test coils)
Figure 2. Keysight’s oscilloscope-based NFC test system (holding fixture for 3-in-1 antenna/DUT not
included).