Datasheet

Page 40
Find us at www.keysight.com
Dual-channel WaveGen — built-in function/arbitrary waveform generator (Specification are typical) (Continued)
Sine Frequency range 0.1 Hz to 20 MHz
Amplitude flatness ± 0.5 dB (relative to 1 kHz)
Harmonic distortion –40 dBc
Spurious (nonharmonics) –40 dBc
Total harmonic distortion 1%
SNR (50 Ω load, 500 MHz BW) 40 dB (Vpp ≥ 0.1 V); 30 dB (Vpp < 0.1V)
Square wave/pulse Frequency range 0.1 Hz to 10 MHz
Duty cycle 20 to 80%
Duty cycle resolution Larger of 1% or 10 ns
Rise/fall time 19 ns (10 to 90%)
Overshoot < 2%
Asymmetry (at 50% DC) ± 1% ± 5 ns
Jitter (TIE RMS) 500 ps
Ramp/triangle wave Frequency range 0.1 Hz to 200 kHz
Linearity 1%
Variable symmetry 0 to 100%
Symmetry resolution 1%
Pulse Frequency range 0.1 Hz to 10 MHz
Pulse width 20 ns minimum
Pulse with resolution 10 ns
Edge time Fixed at 19 ns (not variable)
Overshoot < 2%
Noise Bandwidth 20 MHz typical
Sine cardinal (sinc) Frequency range 0.1 Hz to 1.0 MHz
Exponential rise/fall Frequency range 0.1 Hz to 5.0 MHz
Cardiac Frequency range 0.1 Hz to 200.0 kHz
Gaussian pulse Frequency range 0.1 Hz to 5.0 MHz
Arbitrary Waveform length 1 to 8,192 points
Amplitude resolution 10 bits (including sign bit)
1
Repetition rate 0.1 Hz to 12 MHz
Sample rate 100 MSa/s
Filter bandwidth 20 MHz
Frequency Sine wave and ramp accuracy 130 ppm (frequency < 10 kHz)
50 ppm (frequency > 10 kHz)
Square wave and pulse accuracy [50 + frequency/200] ppm (frequency < 25 kHz)
50 ppm (frequency ≥ 25 kHz)
Resolution 0.1 Hz or 4 digits, whichever is larger
1. Full resolution is not available at output due to internal attenuator stepping.
Performance Characteristics (Continued)