Datasheet

Page 32
Find us at www.keysight.com
DSOX/MSO 6000 X-Series digital storage/mixed signal oscilloscopes
6000 X-Series specification overview
Half channel bandwidth
1
(–3 dB) 1 GHz 2.5 GHz 4 GHz 6 GHz
Full channel bandwidth
1
(–3 dB) 1 GHz 2.5 GHz 4 GHz 4 GHz
Full channel equivalent time bandwidth
1
(–3 dB) N/A N/A N/A 6 GHz
Calculated rise time (10 to 90%) ≤ 350 ps ≤ 140 ps ≤ 112.5 ps ≤ 75 ps
Input channels DSOX6002A 2
DSOX6004A 4
MSOX6002A 2 + 16
MSOX6004A 4 + 16
Maximum sample rate 20 GSa/s half channels, 10 GSa/s full channels
Maximum memory depth Standard 4 Mpts, Standard segment memory
Display size and type 12.1-inch capacitive multi-touch/gesture-enabled display
Waveform update rate > 450,000 waveforms per second
Typical noise floor at 1 mV/div, 50 Ω 115 μVrms 150 μVrms 150 μVrms 210 μVrms
Vertical system analog channels
Hardware bandwidth
limits
1 MΩ 20 MHz, 200 MHz (selectable per channel)
50 Ω 20 MHz, 200 MHz, 1.5 GHz, 3 GHz (selectable per channel)
Input coupling AC, DC
Input impedance Selectable: 1 MΩ ± 1% (14 pF), 50 Ω ± 3%
Input sensitivity range 1 MΩ 1 mV/div to 5 V/div
2
(200 MHz bandwidth limit at ≤ 2 mV/div)
50 Ω 1 mV/div to 1 V/div
2
Vertical resolution 8 bits (measurement resolution is 12 bits with averaging)
Maximum input voltage
No transient overvoltage allowed in either the
50Ω or 1 MΩ path, with or without probes.
Use this instrument only for measurements
within its specified measurement category
(not rated for CAT II, III, IV).
1 MΩ
30 Vrms or ±40 Vmax (DC + Vpeak); Probing technology allows testing of higher voltages. The
included N2894A 10:1 probe supports 300 Vrms or ±400 Vmax (DC + Vpeak).
50 Ω 50 Ω: ± 5Vpk max
D
C vertical gain accuracy
1
± 3 div: 1.5% of full scale (typical)
± 4 div: 2.5% of full scale (warranted)
2
DC vertical offset accuracy ± 0.1 div ± 2 mV ± 1% of offset setting (valid for an offset of ≤ ± 12 divisions)
Channel-to-channel isolation ≥ 100:1 (DC to 1 GHz), ≥ 30:1 (> 1 GHz)
Offset range 1 MΩ ± 5 V (1 to < 10 mV/div), ± 20 V (10 to ≤ 200 mV/div), ± 100 V (> 200 mV/div)
50 Ω ± 12 div or ± 0.8 V, whichever is smallest (≤ 100 mV/div)
± 12 div or ± 4 V, whichever is smallest (> 100 mV/div)
Dynamic range 1 MΩ ± 8 divisions from center screen (≤ 100 mV/div), 2nd harmonic distortion of - 40 dbc
± 4 divisions from center screen (> 101 mV/div), 2nd harmonic distortion of - 23 dbc
(For a 10:1 probe on the 1 MΩ input, vertical scaling is multiplied by 10)
50 Ω ± 8 divisions from center screen
Noise floor at 50 Ω 1 GHz 2.5 GHz 4 GHz 6 GHz
1 mV/div 115 µVrms 150 µVrms 150 µVrms 210 µVrms
10 mV/div 330 µVrms 355 µVrms 350 µVrms 395 µVrms
100 mV/div 3.15 mVrms 3.25 mVrms 3.20 mVrms 3.35 mVrms
1 V/div 31.5 mVrms 32.5 mVrms 32 mVrms 33.5 mVrms
ESD tolerance ± 2 kV (on input BNCs)
1. Denotes warranted specifications; All others are typical. Specifications are valid after a 30-minute warm-up period and ± 10 °C from firmware calibration
temperature.
2. 1 mV/div is a magnification of 2 mV/div setting. For vertical accuracy calculations, use full scale of 16 mV for 1 mV/div sensitivity setting.
Performance Characteristics