Datasheet

15
DSOX2000 Series
(digital signal oscilloscope)
MSOX2000 Series
(mixed signal oscilloscope)
Characteristic 2002A 2004A 2012A 2014A 2022A 2024A 2002A 2004A 2012A 2014A 2022A 2024A
Analog Bandwidth*
(-3 dB)
70 MHz 100 MHz 200 MHz 70 MHz 100 MHz 200 MHz
Bandwidth upgrade YES YES NO YES YES NO
Channels 2 4 2424242424
Maximum sample
rate
1 GSa/s per channel, 2 GSa/s half-channel interleaved
Maximum memory
depth (record
length)
50 kpts per channel, 100 kpts half-channel interleaved
Display 8.5-inch WVGA with 64 levels of intensity grading
Waveform update
rate
50,000 waveforms/s
External trigger
input
Included on all models
Vertical resolution 8 bits
Horizontal
resolution
2.5 ps
Vertical sensitivity
(range)
1 mV/div to 5 V/div **
DC vertical
accuracy
±[DC vertical gain accuracy + DC vertical offset accuracy + 0.25% full scale] **
DC vertical
gain accuracy*
±3% full scale (≥10 mV/div); ±4% full scale (<10 mV/div) **
DC vertical offset
accuracy
±0.1div ± 2mV ± 1% of offset setting
Vertical zoom Ability to scale and position a live or stopped waveform vertically. When the acquisition is stopped, turning
the vertical scale and offset (position) knobs will scale and move the signal. Pan and zoom redraws the
waveform in <100 ms.
Maximum input
voltage
CAT I 300 Vrms, 400 Vpk; transient overvoltage 1.6 kVpkCAT II 300 Vrms,
400 Vpk with N2862A or N2863A 10:1 probe: 300 Vrms
Position
range/offset
1 mV to 200 mV/div: ±2 V
>200 mV to 5 V/div: ± 50V
Bandwidth limit 20 MHz selectable
Input coupling AC, DC
Input impedance 1 MΩ ±2%
Time base range 5 ns/div to
50 s/div
5 ns/div to
50 s/div
2 ns/div to
50 s/div
5 ns/div to
50 s/div
5 ns/div to
50 s/div
2 ns/div to
50 s/div
Time base
accuracy*
25 ppm ±5 ppm per year (aging)
∆ Time accuracy
(using cursors)
± (time base accuracy* reading) ± (0.0016 * screen width) ± 100 ps
Dynamic range (±8 divisions from center screen)
Horizontal zoom
(modes)
Horizontally expand or compress a live or stopped waveform
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Performance characteristics
* Denotes warranted specifications, all others are typical.
Specifications are valid after a 30-minute warm-up period and from ±10 °C firmware calibration temperature.
** 1 mV/div and 2 mV/div is a magnification of 4 mV/div setting. For vertical accuracy calculations, use full scale of 32 mV for 1 mV/div and 2 mV/div sensitivity setting.