Datasheet

Page 13
Find us at www.keysight.com
Parametric and serial bus search and navigation comes standard
on the 3000T X-Series oscilloscopes� When you are capturing
long, complex waveforms using an oscilloscope’s acquisition
memory, manually scrolling through stored waveform data to find
specific events of interest can be slow and cumbersome� With
automatic search and navigation capability, you can easily set
up specific search criteria and then quickly navigate to “found
and marked” events� Available search criteria include edges,
pulse width (time-qualified), rise/fall times (time-qualified), runt
pulses (time-and level-qualified), frequency peaks (FFT function,
threshold and excursion qualified), and serial bus frames, packets,
and errors�
Close-up on buttons on the front panel of the scope�
Alternatively, you also can use the touch navigation control�
Figure 14� The 3000T X-Series was set up to capture clock signals for
FFT analysis� Using the search and navigation capability, the scope was
able to find, mark (white triangles) and quickly navigate to the first 11
frequency peaks occurrences� You can sort it in the order of frequency or
amplitude�
Discover: Dedicated Search and Navigation Helps you Navigate Deep Memory