Datasheet

Page 10
Find us at www.keysight.com
Zone touch trigger
One of the biggest challenges of using an oscilloscope is setting
up an advanced trigger to isolate a signal of interest� While
advanced triggers are powerful features, zone touch trigger
provides a turnkey trigger solution.
You simply observe the signal of interest on the display, and
draw a zone (box) around it. What used to be hours of work can
now take just a few seconds. If you want to move your zones to
another location, just drag them over� The 4000 X-Series can be
set up to easily trigger on one or two zone boxes simultaneously
with either must intersect or must not intersect conditions�
Zone triggering does not compromise the waveform update
rate; the 4000 X-Series will still maintain an ultra-fast 200,000
waveforms per second or more, even with additional features
turned on� In other words, the oscilloscope that sees everything
can easily trigger on anything�
Zone touch trigger + segment memory: A whole
new experience
The combination of the industry’s only hardware-based zone
touch trigger with the 4000 X-Series’ segment memory simplifies
and enhances your debugging experience� In Figure 16, the 4000
X-Series has isolated and captured 1,000 metastable signals,
showing the critical bit errors over a 32-second time span at
5 GS/s sampling rate in the segment memory� The segment
memory also allows you to overlay all segments to identify the
worst-case signal�
Figure 15� When you see anomalies, all you have to do is
draw a zone box to trigger on them�
Figure 16� Combination of the zone touch trigger and
segmented memory�
Oscilloscope Experience Redefined:
Experience the Usability (Continued)