Datasheet

Introduction
Serial buses are pervasive in today’s digital designs and are used for a variety of purposes including on-
board chip-to-chip communication, CPU to peripheral control, as well as for remote sensor data transfer
and control.
Without intelligent oscilloscope serial bus triggering and protocol decode, it can be difficult to debug
these buses and correlate data transfers with other mixed signal interactions in your system. Keysight
Technologies, Inc. InfiniiVision X-Series oscilloscopes (DSOs) and mixed-signal oscilloscopes (MSOs) offer
optional integrated serial bus triggering and hardware-based protocol decoding solutions that give you the
tools you need to accelerate debug of your designs that include serial bus communication.
Supported serial protocols (trigger and decode)
– I
2
C
– SPI
– CAN (with .dbc symbolic decoding)
– CAN FD (with .dbc symbolic decoding)
– LIN (with .ldf symbolic decoding)
– FlexRay (includes physical layer pre-compliance test software)
– SENT
– CXPI
– USB 2.0 (low-, full-, and hi-speed)
– USB 2.0 signal quality
– USB PD
– I
2
S
– MIL-STD 1553
– ARINC 429
– User-definable Manchester
– User-definable NRZ
Refer to ordering information near the end of this document for specific oscilloscope model compatibility.
Features
– Hardware-based decoding
– Multi-bus analysis with interleaved lister display
– Automatic search and navigation
– Compatible with segmented memory acquisition
– Symbolic trigger and decode (CAN, CAN FD, and LIN)
– Eye-diagram mask testing (CAN, CAN FD, MIL-STD 1553, and ARINC 429)