Datasheet

22 | Keysight | Serial Bus Options for InfiniiVision X-Series Oscilloscopes - Data Sheet
I
2
S
SCLK, WS and SDATA input source Analog channels 1, 2, 3 or 4
Digital channels D0 to D15
Bus configuration:
– Transmitted word size 4 to 32 bits (user selectable)
– Decoded/receiver word size 4 to 32 bits (user selectable)
– Alignment Standard, left-justified or right-justified
– Word select - low Left-channel or right-channel
– SCLK slope Rising edge or falling edge
– Decoded base Hex (2’s complement) or signed decimal
Baud rates 2400 b/s to 625 kb/s
Triggering:
– Audio channel Audio left, audio right or either
– Trigger modes = (Equal to entered data value)
≠ (Not equal to entered data value)
< (Less than entered data value)
> (Greater than entered data value)
>< (Within range of entered data values)
<> (Out of range of entered data values)
Increasing value that crosses armed (<=) and trigger (>=) entered data values
Decreasing value that crosses armed (>=) and trigger (<=) entered data values
Hardware-based decode:
– Left channel L: “decoded value” in white
– Right channel R: “decoded value” in green
– Error ERR in red (mismatch between transmitted and received word size or invalid input signaling)
– Word size indicator “# of TX / # of RX” CLKS in blue displayed above each decoded work
Multi-bus analysis
I
2
S plus one other serial bus (excluding another I
2
S bus)
Specifications/Characteristics (Continued)