Datasheet

20 | Keysight | Serial Bus Options for InfiniiVision X-Series Oscilloscopes - Data Sheet
Specifications/Characteristics (Continued)
FlexRay
FlexRay input source Channel 1, 2, 3 or 4 (using differential probe)
FlexRay channels A or B
Baud rates 2.5 Mbps, 5.0 Mbps and 10 Mbps
Frame triggering Frame type: Startup (SUP), not startup (~SUP), sync (SYNC), not sync (~SYNC), null (NULL), not null
(~NULL), normal (NORM) and All
Frame ID: 1 to 2047 (decimal format) and All
Cycle
Base: 0 to 63 (decimal format) and All
Repetition: 1, 2, 4, 8, 16, 32, 64 (decimal format) and All
Error triggering All errors
Header CRC error
Frame CRC error
Event triggering Wake-up
TSS (transmission start sequence)
BSS (byte start sequence)
FES/DTS (frame end or dynamic trailing sequence)
Frame decoding Frame type (NORM, SYNC, SUP, NULL in blue)
Frame ID (decimal digits in yellow)
Payload-length (decimal number of words in green)
Header CRC (hex digits in blue if valid or red digits if invalid)
Cycle number (decimal digits in yellow)
Data bytes (HEX digits in white)
Frame CRC (hex digits in blue if valid or red digits
Totalize function Total frames
Total synchronization frames
Total null frames
Eye-diagram mask testing (requires mask test
option plus downloadable mask files)
TP1 standard voltage (10 Mbps only)
TP1 increased voltage (10 Mbps only)
TP11 standard voltage (10 Mbps only)
TP11 increased voltage (10 Mbps only)
TP4 10 Mbps, TP4 5 Mbps and TP4 2.5 Mbps
Multi-bus analysis FlexRay plus one other serial bus (including another FlexRay bus)