Datasheet

11 | Keysight | Serial Bus Options for InfiniiVision X-Series Oscilloscopes - Data Sheet
RS232/UART
Tx and Rx input source Analog channels 1, 2, 3 or 4
Digital channels D0 to D15 (3000, 4000 and 6000 X-Series only)
Bus configuration
– Baud rates 100 b/s up to 12 Mb/s (maximum 10 Mb/s on 1000X and 2000X)
– Number of bits 5 to 9
– Parity None, odd or even
– Polarity Idle low or idle high
– Bit order LSB out first or MSB out first
Triggering Rx start bit
Rx stop bit
Rx data
Rx 1:data (9-bit format)
Rx 0:data (9-bit format)
Rx X:data (9-bit format)
Rx or Tx parity error
Tx start bit
Tx stop bit
Tx data
Tx 1:data (9-bit format)
Tx 0:data (9-bit format)
Tx X:data (9-bit format)
Burst (nth frame within burst defined by timeout)
Hardware-based decode
– Number of decode traces 2 independent traces (Tx and Rx)
– Data format Binary, hex or ASCII-code characters
– Data byte display White characters if no parity error, red characters if parity or bus error
– Idle bus trace Mid-level bus trace in blue
– Active bus trace Bi-level trace in blue
Multi-bus analysis RS232/UART plus one other serial bus, including another RS232/UART bus. (3000, 4000 and 6000 X-Series
only)
Totalize/counter function Total received frames
Total transmitted frames
Total parity error frames (with percentage)
Specifications/Characteristics (Continued)
Tabular protocol lister display is not available on 1000 X-Series oscilloscopes.