Datasheet

10 | Keysight | Serial Bus Options for InfiniiVision X-Series Oscilloscopes - Data Sheet
SPI
MOSI, MISO, Clock and CS input source Analog channels 1, 2, 3 or 4
Digital channels D0 to D15 (3000, 4000 and 6000 X-Series only)
Max clock/data rate Up to 25 Mb/s
Triggering 4- to 64-bit data pattern during a user-specified framing period
Framing period can be a positive or negative chip select (CS or ~CS) or clock idle time (timeout)
Hardware-based decode Number of decode traces: 2 independent traces (MISO and MOSI)
Data (hex digits in white)
Unknown/error bus (bi-level bus trace in red)
Number of clocks/packet (“XX CLKS” in light-blue above data packet)
Idle bus (mid-level bus trace in dark blue)
Active bus (bi-level bus trace in dark blue)
Multi-bus analysis SPI plus one other serial bus, excluding another SPI bus. (3000, 4000 and 6000 X-Series only)
Specifications/Characteristics (Continued)
Tabular protocol lister display is not available on 1000 X-Series oscilloscopes.