Manualshelf

User Manual

ManualsBrandsKeysight ManualsBenchtop OscilloscopesOscilloscope, 2x 100MHz, 2GSPS
81828384858687888990
Table Of Contents
Commands Quick Reference 4
Keysight InfiniiVision 1000 X-Series Oscilloscopes Programmer's Guide 89
n/a :SBUS<n>:UART:COUNt:T
XFRames? (see
page 521)
<frame_count> ::= integer in NR1
format
:SBUS<n>:UART:FRAMing
<value> (see page 522)
:SBUS<n>:UART:FRAMing
? (see page 522)
<value> ::= {OFF | <decimal> |
<nondecimal>}
<decimal> ::= 8-bit integer from
0-255 (0x00-0xff)
<nondecimal> ::= #Hnn where n ::=
{0,..,9 | A,..,F} for hexadecimal
<nondecimal> ::= #Bnn...n where n
::= {0 | 1} for binary
:SBUS<n>:UART:PARity
<parity> (see
page 523)
:SBUS<n>:UART:PARity?
(see page 523)
<parity> ::= {EVEN | ODD | NONE}
:SBUS<n>:UART:POLarit
y <polarity> (see
page 524)
:SBUS<n>:UART:POLarit
y? (see page 524)
<polarity> ::= {HIGH | LOW}
:SBUS<n>:UART:SOURce:
RX <source> (see
page 525)
:SBUS<n>:UART:SOURce:
RX? (see page 525)
<source> ::= {CHANnel<n> |
EXTernal}
<n> ::= 1 to (# analog channels)
in NR1 format
:SBUS<n>:UART:SOURce:
TX <source> (see
page 526)
:SBUS<n>:UART:SOURce:
TX? (see page 526)
<source> ::= {CHANnel<n> |
EXTernal}
<n> ::= 1 to (# analog channels)
in NR1 format
:SBUS<n>:UART:TRIGger
:BASE <base> (see
page 527)
:SBUS<n>:UART:TRIGger
:BASE? (see page 527)
<base> ::= {ASCii | HEX}
:SBUS<n>:UART:TRIGger
:BURSt <value> (see
page 528)
:SBUS<n>:UART:TRIGger
:BURSt? (see page 528)
<value> ::= {OFF | 1 to 4096 in
NR1 format}
Table 26 :SBUS<n>:UART Commands Summary (continued)
Command Query Options and Query Returns