User Manual

Commands Quick Reference 4
Keysight InfiniiVision 1000 X-Series Oscilloscopes Programmer's Guide 71
n/a :MARKer:YDELta? (see
page 334)
<return_value> ::= Y cursors
delta value in NR3 format
:MARKer:YUNits <mode>
(see page 335)
:MARKer:YUNits? (see
page 335)
<units> ::= {BASE | PERCent}
:MARKer:YUNits:USE
(see page 336)
n/a n/a
Table 16 :MARKer Commands Summary (continued)
Command Query Options and Query Returns
Table 17 :MEASure Commands Summary
Command Query Options and Query Returns
:MEASure:ALL (see
page 347)
n/a n/a
:MEASure:BRATe
[<source>] (see
page 348)
:MEASure:BRATe?
[<source>] (see
page 348)
<source> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r> |
EXTernal}
<n> ::= 1 to (# of analog
channels) in NR1 format
<r> ::= 1 to (# ref waveforms) in
NR1 format
<return_value> ::= bit rate in
Hz, NR3 format
:MEASure:CLEar (see
page 349)
n/a n/a
:MEASure:COUNter
[<source>] (see
page 350)
:MEASure:COUNter?
[<source>] (see
page 350)
<source> ::= {CHANnel<n> |
EXTernal}
<n> ::= 1 to (# analog channels)
in NR1 format
<return_value> ::= counter
frequency in Hertz in NR3 format
:MEASure:DEFine
DELay, <delay
spec>[,<source>] (see
page 351)
:MEASure:DEFine?
DELay[,<source>] (see
page 352)
<delay spec> ::=
<edge_spec1>,<edge_spec2>
edge_spec1 ::=
[<slope>]<occurrence>
edge_spec2 ::=
[<slope>]<occurrence>
<slope> ::= {+ | -}
<occurrence> ::= integer
<source> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r>}