Manualshelf

User Manual

ManualsBrandsKeysight ManualsBenchtop OscilloscopesOscilloscope, 2x 100MHz, 2GSPS
601602603604605606607608609610
Table Of Contents
602 Keysight InfiniiVision 1000 X-Series Oscilloscopes Programmer's Guide
27 :TRIGger Commands
:TRIGger:SHOLd Commands
NOTE
The :TRIGger:SHOLd commands are available on the DSOX1000-Series oscilloscopes only.
Table 79 :TRIGger:SHOLd Commands Summary
Command Query Options and Query Returns
:TRIGger:SHOLd:SLOPe
<slope> (see page 603)
:TRIGger:SHOLd:SLOPe?
(see page 603)
<slope> ::= {NEGative | POSitive}
:TRIGger:SHOLd:SOURce
:CLOCk <source> (see
page 604)
:TRIGger:SHOLd:SOURce
:CLOCk? (see page 604)
<source> ::= {CHANnel<n>}
<n> ::= 1 to (# analog channels)
in NR1 format
:TRIGger:SHOLd:SOURce
:DATA <source> (see
page 605)
:TRIGger:SHOLd:SOURce
:DATA? (see page 605)
<source> ::= {CHANnel<n>}
<n> ::= 1 to (# analog channels)
in NR1 format
:TRIGger:SHOLd:TIME:H
OLD <time>[suffix]
(see page 606)
:TRIGger:SHOLd:TIME:H
OLD? (see page 606)
<time> ::= floating-point number
in NR3 format
[suffix] ::= {s | ms | us | ns |
ps}
:TRIGger:SHOLd:TIME:S
ETup <time>[suffix]
(see page 607)
:TRIGger:SHOLd:TIME:S
ETup? (see page 607)
<time> ::= floating-point number
in NR3 format
[suffix] ::= {s | ms | us | ns |
ps}