User Manual

536 Keysight InfiniiVision 1000 X-Series Oscilloscopes Programmer's Guide
25 :SYSTem Commands
Introduction to
:SYSTem
Commands
SYSTem subsystem commands enable writing messages to the display, setting
and reading both the time and the date, querying for errors, and saving and
recalling setups.
:SYSTem:PROTection:LO
CK <value> (see
page 547)
:SYSTem:PROTection:LO
CK? (see page 547)
<value> ::= {{1 | ON} | {0 |
OFF}}
:SYSTem:RLOGger
<setting>[,<file_name
>[,<write_mode>]]
(see page 548)
n/a <setting> ::= {{0 | OFF} | {1 |
ON}}
<file_name> ::= quoted ASCII
string
<write_mode> ::= {CREate |
APPend}
:SYSTem:RLOGger:DESTi
nation <dest> (see
page 549)
:SYSTem:RLOGger:DESTi
nation? (see page 549)
<dest> ::= {FILE | SCReen | BOTH}
:SYSTem:RLOGger:DISPl
ay {{0 | OFF} | {1 |
ON}} (see page 550)
:SYSTem:RLOGger:DISPl
ay? (see page 550)
<setting> ::= {0 | 1}
:SYSTem:RLOGger:FNAMe
<file_name> (see
page 551)
:SYSTem:RLOGger:FNAMe
? (see page 551)
<file_name> ::= quoted ASCII
string
:SYSTem:RLOGger:STATe
{{0 | OFF} | {1 |
ON}} (see page 552)
:SYSTem:RLOGger:STATe
? (see page 552)
<setting> ::= {0 | 1}
:SYSTem:RLOGger:TRANs
parent {{0 | OFF} |
{1 | ON}} (see
page 553)
:SYSTem:RLOGger:TRANs
parent? (see page 553)
<setting> ::= {0 | 1}
:SYSTem:RLOGger:WMODe
<write_mode> (see
page 554)
:SYSTem:RLOGger:WMODe
? (see page 554)
<write_mode> ::= {CREate |
APPend}
:SYSTem:SETup
<setup_data> (see
page 555)
:SYSTem:SETup? (see
page 555)
<setup_data> ::= data in IEEE
488.2 # format.
:SYSTem:TIME <time>
(see page 557)
:SYSTem:TIME? (see
page 557)
<time> ::= hours,minutes,seconds
in NR1 format
Table 73 :SYSTem Commands Summary (continued)
Command Query Options and Query Returns