User Manual

:SBUS<n> Commands 24
Keysight InfiniiVision 1000 X-Series Oscilloscopes Programmer's Guide 491
:SBUS<n>:LIN:TRIGger
(see page 782)
Command Syntax
:SBUS<n>:LIN:TRIGger <condition>
<condition> ::= {SYNCbreak | ID | DATA}
The :SBUS<n>:LIN:TRIGger command sets the LIN trigger condition to be:
•SYNCbreak — Sync Break.
•ID — Frame ID.
Use the :SBUS<n>:LIN:TRIGger:ID command to specify the frame ID.
•DATA — Frame ID and Data.
Use the :SBUS<n>:LIN:TRIGger:ID command to specify the frame ID.
Use the :SBUS<n>:LIN:TRIGger:PATTern:DATA:LENGth and
:SBUS<n>:LIN:TRIGger:PATTern:DATA commands to specify the data string
length and value.
Query Syntax
:SBUS<n>:LIN:TRIGger?
The :SBUS<n>:LIN:TRIGger? query returns the current LIN trigger value.
Return Format
<condition><NL>
<condition> ::= {SYNC | ID | DATA}
Errors • "-241, Hardware missing" on page 745
See Also • "Introduction to :TRIGger Commands" on page 571
• ":TRIGger:MODE" on page 580
• ":SBUS<n>:LIN:TRIGger:ID" on page 492
• ":SBUS<n>:LIN:TRIGger:PATTern:DATA:LENGth" on page 495
• ":SBUS<n>:LIN:TRIGger:PATTern:DATA" on page 493
• ":SBUS<n>:LIN:SOURce" on page 488