Manualshelf

User Manual

ManualsBrandsKeysight ManualsBenchtop OscilloscopesOscilloscope, 2x 100MHz, 2GSPS
12345678910
Table Of Contents
Keysight InfiniiVision 1000 X-Series Oscilloscopes Programmer's Guide 3
In This Book
This book is your guide to programming the 1000 X-Series oscilloscopes:
The first few chapters describe how to set up and get started:
• Chapter 1, “What's New,” starting on page 25, describes programming
command changes in the latest version of oscilloscope software.
• Chapter 2, “Setting Up,” starting on page 33, describes the steps you must take
before you can program the oscilloscope.
• Chapter 3, “Getting Started,” starting on page 39, gives a general overview of
oscilloscope program structure and shows how to program the oscilloscope
using a few simple examples.
• Chapter 4, “Commands Quick Reference,” starting on page 51, is a brief listing
of the 1000 X-Series oscilloscope commands and syntax.
The next chapters provide reference information on common commands, root level
commands, other subsystem commands, and error messages:
• Chapter 5, “Common (*) Commands,” starting on page 107, describes
commands defined by the IEEE 488.2 standard that are common to all
instruments.
• Chapter 6, “Root (:) Commands,” starting on page 133, describes commands
that reside at the root level of the command tree and control many of the basic
functions of the oscilloscope.
• Chapter 7, “:ABUS Commands,” starting on page 165, describes commands
that control all oscilloscope functions associated with the analog channels bus
display.
• Chapter 8, “:ACQuire Commands,” starting on page 175, describes commands
for setting the parameters used when acquiring and storing data.
• Chapter 9, “:CALibrate Commands,” starting on page 189, describes utility
commands for determining the state of the calibration factor protection button.
Table 1 1000 X-Series Model Numbers, Bandwidths
Model: EDUX1002A EDUX1002G DSOX1102A DSOX1102G
Channels: 2
Bandwidth: 50 MHz 70 MHz, 100 MHz with DSOX1B7T102
upgrade
Sampling rate: 1 GSa/s 2 GSa/s
Memory: 100 kpts 1 Mpts
Segmented memory: No Yes
Waveform generator: No Yes (20 MHz) No Yes (20 MHz)
Mask/limit test: No Yes