Datasheet

Page 22
Find us at www.keysight.com
260.5 mm
212.8 mm
450 mm
87.7 mm
480 mm
104 mm
Input/Output Connectivity
GPIB IEEE-488.2
Ethernet 100BASE-T / 10BASE-T
USB USB 2.0 host controller(front), USB 2.0 device interface (rear)
Digital I/O Connector type 25-pin female D.
Input/output pins 14 open drain I/O bits
Absolute max input voltage 5.25 V
Absolute min input voltage - 0.25 V
Logic low max input voltage 0.8 V
Logic high min input voltage 2.0 V
Max source current 1 mA @ V
out
= 0 V
Max sink current 50 mA @ V
out
= 5 V
5 V power supply pin Limited to 500 mA, solid state fuse protected
Safety interlock pin: One active high pin and one active low pin. Activation of both pin enables output voltage > 42 V
Max number of simultaneously
triggered units (using Digital I/O)
1
:
8
1. Supplemental characteristic
Program, Software and Drivers
Programming SCPI
Program memory 100 kB (2500 lines typical)
LXI compliance LXI Core Conformant
Software available Quick I/V Measurement Software, Graphical Web Interface, BenchVue
Drivers available IVI-C, IVI-COM drivers, LabVIEW drivers