Datasheet

Pulse source supplemental characteristics
Minimum programmable pulse width 50 μs
Pulse width programming resolution 1 μs
Pulse width definition The time from 10 % leading to 90 % trailing edge as follows
Minimum pulse width at the given voltage, current and settling conditions
Source value Limit value Load Source settling (% of range) Min pulse width
200 V 1.5 A 200 0.1% 1 ms
6 V 10.5 A 0.6 Ω 0.1% 0.2 ms
1.5 A 200 V 65 Ω 0.1% 2.5 ms
10.5 A 6 V 0.5 Ω 0.1% 0.2 ms
Maximum pulse width and duty cycle
Pulsed DC
Max
voltage
Max peak
current
Max base
current
Pulse width Max duty cycle Max voltage Max current
DC or pulsed 210 V 0.105 A 0.105 A 50 μs to 99999.9 s 99.9999 % 210 V 0.105 A
21 V 1.515 A
1
1.515 A
1
50 μs to 99999.9 s 99.9999 % 21 V 1.515 A
1
6 V 3.03A
1
3.03 A
1
50 μs to 99999.9 s 99.9999 % 6 V 3.03 A
1
Pulsed only 200 V
1.515A
50 mA 50 μs to 2.5 ms
2.5 %
180 V 1.05 A 50 mA 50 μs to 10 ms 2.5 %
6 V 10.5 A 0.5 A 50 μs to 1 ms 2.5 %
1. Max current limitation: For 21 V/1.515 A and 6 V / 3.03 A ranges, total max current is limited by the table in page 12 for using 2 channels. Max current
is not limited for using 1 channel only.
90%
Peak level
Base level
Pulse width
10%
15 | Keysight | B2900A Series Precision Source/Measure Unit – Data Sheet