Datasheet

5
Supported Languages and Applications
Applications (with Intui Link) – Microsoft Excel 97 and 2000
– Microsoft Word 97 and 2000
– Check the Web for latest supported applications
Software development applications – Keysight VEE 6.0 or greater
– Visual Basic 6.0
– Visual C++ 6.0
– Visual Studio .NET
– BASIC for Windows
– LabVIEW 6.0 or greater
General Characteristics
Power USB bus-powered device, +5 V, 500 mA•(max), 200 mA(typ)
GPIB transfer rate 1.15 MB/s or better
Connectors Standard 24-pin IEEE-488, Standard USB A
USB Hubs Self-powered hubs
Parallel polling A single parallel poll can check up to 8 individual devices at once,
corresponding to the number of data lines on the GPIB.
Dimensions 105 mm (L) x 64 mm (W) x 30 mm (H) (includes connectors)
Weight 215 grams
Cable 2.5 meters, shielded, connector rated for 1500 insertions
LED Indicators Ready, Access, Fail
Warranty 1 year
Maximum connections Maximum 4 converters can be connected to the PC
Instrument connection 14 instruments – daisy chain via GPIB
Configuration Plug-and-play

Operating environment 0 °C to 55 °C
Storage environment – 40 °C to +70 °C
Operating humidity Up to 90 % at 40 °C non-condensing
Storage humidity Up to 90 % at 65 °C non condensing
NOTE: If possible, you should always use the current version of the Keysight IO Libraries (spacing) Suite.
This version supports the newest interfaces and operating systems, and has the most advanced features.
The Keysight 82357B USB/GPIB Interface is supported for PCs with Windows XP Professional, Windows
Vista or Windows 7 operating systems only. However, you may need an earlier version of the IO Libraries
Suite to support an older interface or operating system. If you need an earlier version of Keysight IO
Libraries, go to http://www.keysight.com/find/iosuite to locate the version you need.