Datasheet

16 Chapter 2
Overview
Functions
Figure 2-3 Probe Adapters
Table 2-2 Probe Adapters
No. NAME FUNCTION
4 3.5-mm Short A short device used for the adapter setup.
5 3.5-mm Load A load device (50 Ω) used for the adapter setup.
6 Pin Probe Attached to the probe to measure implemented
circuits, mounted devices, and printed circuit
patterns.
7 Ground Lead Attached to the pin probe to connect to the GND of
the DUT.
8 BNC Adapter Attached to the probe to measure devices and cables
that have BNC connectors.
9 Clip Lead Attached to the top of the BNC adapter by the probe
to measure mounted lead components or large
devices.