Datasheet

Chapter 1 11

Installation Guide

Connecting the 42941A

Follow the steps below to connect the 42941A to the Impedance Analyzer.

Step 1. Join the 42941A four-terminal pair connection block to the test connectors on the

front panel of the Impedance Analyzer by gently matching the four BNC

connectors and securing screws of the block with the test connectors and accessory

mounting holes of the instrument until they come into complete contact.

Step 2. Turn the block’s two fastening screws clockwise at the same time until the

four-terminal pair connection block is secured firmly to the instrument.

Figure 1-1 Connecting 42941A to Impedance Analyzer