Datasheet

Find us at www.keysight.com Page 33
Ordering Instructions
Instructions
Mainframe – holds up to 8 plug-in modules
34980A
Multifunction data acquisition
mainframe
Comes standard with “DMM” option and BenchVue DAQ
BV0006B
BenchVue Data Acquisition Control
and Analysis (DAQ)
BenchVue makes it simple to connect, control instruments, and
automate test sequences. Supported plug-in modules:
34921A, 34922A, 34923A, 34924A, 34925A, 34931A, 34932A,
34933A, 34937A, 34938A, 34952A.
Module
Description
Connectors
Optional terminal blocks, cables, connector kits
Multiplexer modules
34921A
40-channel armature multiplexer w/low
thermal offset (order 34921T for temp
reference)
2 – 50-pin
Dsub, Male
3492xT Terminal block with screw connectors
Y1135A – 1.5 m 50-pin M/F Dsub cable
Y1136A – 3 m 50-pin M/F Dsub cable
Y1139A – 50-pin female solder cup connector kit
34923A
40/80-channel reed multiplexer
34925A
40/80-channel optically isolated FET
multiplexer
34922A
70-channel armature multiplexer
2 – 78-pin
Dsub, Male
3492xT Terminal block, option 001 for solder
connections, option 002 for screw connectors
Y1137A – 1.5 m 78-pin M/F Dsub cable
Y1138A – 3 m 78-pin M/F Dsub cable
Y1140A – 78-pin female solder cup connector kit
34924A
70-channel reed multiplexer
Matrix modules
34931A
Dual 4x8 armature matrix
2 – 50-pin
Dsub, Male
3493xT Terminal block with screw connectors
Y1135A – 1.5 m 50-pin M/F Dsub cable
Y1136A – 3 m 50-pin M/F Dsub cable
Y1139A – 50-pin female solder cup connector kit
34932A
Dual 4x16 armature matrix
34933A
Dual/quad 4x8 reed matrix
34934A
Quad 4x32 reed matrix
2 – 78-pin
Dsub, Male
34934T Terminal block with screw connectors OR
34934C Configuration block
Y1134A – Row expansion cables for 34934C and
34934T
Y1137A – 1.5 m 78-pin M/F Dsub cable
Y1138A – 3 m 78-pin M/F Dsub cable
Y1140A – 78-pin female solder cup connector kit
General purpose/actuator modules
34937A
32-channel Form C/Form A general-
purpose switch
2 – 50-pin
Dsub, Male
3493xT Terminal block with screw connectors
Y1135A – 1.5 m 50-pin M/F Dsub cable
Y1136A – 3 m 50-pin M/F Dsub cable
Y1139A – 50-pin female solder cup connector kit
34938A
20-channel 5-amp Form A switch
34939A
64-channel Form A Switch
2 – 78-pin
Dsub, Male
34939T Terminal block with screw connectors
Y1137A – 1.5 m 78-pin M/F Dsub cable
Y1138A – 3 m 78-pin M/F Dsub cable
Y1140A – 78-pin female solder cup connector kit
RF and microwave modules
34941A
Quad 1x4 50-ohm 3-GHz RF
multiplexer
20 - SMA
Requires standard 50 ohm SMA RF cables, and
optional 8710-2576 SMA Extender wrench for
connecting SMA connectors
34942A
Quad 1x4 75-ohm 1.5 GHz RF
multiplexer
20 – mini
SMB
Requires mini 75 ohm SMB RF cables, adapters
34945A
Microwave switch/attenuator driver
N/A
Requires 34945EXT and optional Y1150A-Y1155A
distribution boards (one 34945EXT is automatically
included in each 34945A order)
34946A
Dual 1x2 SPDT terminated microwave
switch
Option 001: No switches installed
Option 004: 4 GHZ switches installed
Option 020: 20 GHz switches installed
Option 026: 26.5 GHz switches
installed
6 SMA
Requires standard 50 ohm SMA cables and
adapters 8710-2576 SMA Extender for connecting
SMA connectors.
Option 001 supports qty 2 of any of the following
switches:
N1810UL unterminated SPDT
N1810TL terminated SPDT
N1811TL terminated 4 port transfer