Datasheet

This information is subject to change without notice. © Keysight Technologies, 2019, Published in USA, June 10, 2019, 5992-2572EN

Page 19

Find us at www.keysight.com

Learn more at: www.keysight.com

For more information on Keysight Technologies’ products, applications or services,

please contact your local Keysight office. The complete list is available at:

www.keysight.com/find/contactus

Definitions

Specification (spec)

The warranted performance of a calibrated instrument that has been stored for a

minimum of 2 hours within the operating temperature range of 0 to 55 ºC and after

a 1-hour warm up period. All specifications account for the effects of measurement

and calibration-source uncertainties, and were created in compliance with

ISO-17025 methods. Data published in this document are specifications (spec)

only where specifically indicated.

Typical (typ)

The characteristic performance that 80% or more of manufactured instruments will

meet. This data is not warranted, does not include measurement or calibration-source

uncertainty, and is valid only at room temperature (approximately 23 ºC).

Nominal (nom)

The mean or average characteristic performance, or the value of an attribute that is

determined by design such as a connector type, physical dimension, or operating speed.

This data is not warranted and is measured at room temperature (approximately 23 ºC).

Measured (meas)

An attribute measured during product development for the purpose of communicating

expected performance. This data is not warranted and is measured at room temperature

(approximately 23 ºC).