Datasheet
17 | Keysight | M
33600A Series Trueform Waveform Generators - Data Sheet
Arbitrary waveform sequencing
Operation
sequences and segments can be pre-loaded into volatile memory.
Segment length
32 Sa to 4 MSa per channel (64 MSa with Option MEM) in increments of 1 Sa
Sequence length
1 to 512 steps
Segment repeat count
1 to 10
6
General
Connector Front-panel BNC, shell and pin isolated from chassis (±42 V maximum)
Function On, Off, or Inverted
Output impedance (nom)
Isolation Connector shells for channel output(s), Sync, and Mod In are connected together but isolated from the instrument’s
chassis. Maximum allowable voltage on isolated connector shell or pin is ±42 V relative to chassis.
Overload protection Output turns off automatically when an overload is applied. Instrument will tolerate a short circuit
Amplitude
Range
2 mVpp to 20 Vpp into open circuit, 4-digit resolution
Units
Vpp, Vrms, or dBm
Accuracy (at 1 kHz) (spec)
3
± (1% of setting in Vpp) ± (1 mVpp)
Voltage limit function
DC offset
Range
± (10 VDC - Peak AC) into open circuit, 4-digit resolution
Accuracy (spec)
3
± (1% of Offset setting) ± (0.25% of amplitude in Vpp) ± (2 mV)
Standard frequency reference
1 year, 18 to 28 ºC ± (1 ppm of setting + 15 pHz)
1 year, 0 to 55 ºC ± (2 ppm of setting + 15 pHz)
1 year, 0 to 55 ºC ± (0.1 ppm of setting + 15 pHz)
Waveform output characteristics
Carrier AM FM PM FSK BPSK PWM Sum Burst Sweep
Sine & square • • • • • • • •
Pulse • • • • • • • • •
Ramp & triangle • • • • • • • •
Gaussian noise • • •
10
PRBS • • • • •
Single arbitrary • • • • • • •
Sequenced arbitrary • •