Datasheet

20 | Keysight | M 33600A Series Trueform Waveform Generators - Data Sheet
Connector Rear-panel BNC, shell and pin isolated from chassis (±42 V maximum)
Assignment Channel 1, Channel 2, or both
Voltage level (nom) ±1 V or ±5 V full scale, selectable
Input Impedance (nom) 
 0 Hz to 100 kH
General characteristics
Connector Rear-panel BNC, chassis-referenced (functions as Input or Output)
Assignment: Input Channel 1, Channel 2, or both
Output Channel 1 or Channel 2
Polarity Positive or Negative slope
Maximum Rate 1 MHz
Input characteristics
Threshold voltage (nom) (Output Level setting)/2
Impedance (nom) 
Minimum pulse width 100 ns
Variable Trigger Delay 0 to 1000 s, 1-ns resolution
Latency (typ)
15
< 140 ns
Jitter (typ) < 320 ps, rms
Output characteristics

Low level 0 V
High level 
Impedance (nom) 
Duty cycle (nom) 50%
Fan-out Up to four Keysight 33600A Series waveform generators
Input characteristics
Connector Rear-panel BNC, shell and pin isolated from chassis and all other connectors (±42 V max.)
Frequency range: Standard 10 MHz ± 20 Hz
Option OCX 10 MHz ± 1 Hz
Voltage 200 mVpp to 5 Vpp
Impedance 
Lock time (typ) < 2 s
Output characteristics
Connector Rear-panel BNC, chassis-referenced
Frequency (nom) 10 MHz
Level (nom) 
Impedance (nom) 

External trigger/gate input/output
External frequency reference input/output

