Datasheet
6
Specifications are warranted in the temperature range of 0 to 40 °C and after 2 minutes of power up, unless otherwise noted.
Supplemental characteristics – which are not warranted, but are descriptions of performance – are determined either by design or testing.
Parameter
Temperature measurement range –20 ~ 350 °C
Range 1: –20 to 120 °C
Range 2: 0 to 350 °C
Thermal sensitivity Range 1: 0.07 °C (at 30 °C)
Range 2: 0.1 °C (at 30 °C)
Accuracy
1
At 0 ~ 40 °C ambient temperature
±2 °C or ±2% (whichever is greater)
Detector type Uncooled Focal Plane Array (α-Si)
Detector Resolution 160 × 120
Fine Resolution 320 × 240 (IR pixels)
Spectral range
Frame rate 9 Hz
Field of view (FOV) 28° (H) × 21° (V)
Spatial resolution (IFOV) Fine Resolution OFF: 3.1 mrad
Fine Resolution ON: 2.1 mrad
Focal distance
Focus mechanism Manual focus
Correction parameters
Emissivity correction 0.1 to 1.0
Digital zoom Zoom ratio: 4× continuous
Color palette Rainbow, iris, hot iron, gray, inverted gray
Camera mode IR image, visible image, picture in picture, blend
Measurements Center spot, 3x moveable spots, max/min tracking, delta temperature, 3x moveable boxes
(with min/max/avg)
Color alarm High/low temperature in all areas
Alarm zones: Above/below/inside/outside
1. Minimum distance with accuracy, 10 cm to 50 cm: ±4 °C or ±4%.