Easily arrange and rearrange your tests Agilent’s USB modular instruments and USB data acquisition modules make it possible
Easily arrange and rearrange your tests Easily arrange and rearrange your tests One day you’re working on the bench and the next you’re working offsite. On the bench, you may need a small system in a compact chassis. Offsite, you may want to carry two or three essential instruments in your briefcase along with a laptop PC.
Agilent Measurement Manager The Agilent Measurement Manager (AMM) software is an application data viewer designed to help you perform quick configuration and measurement acquisition.
USB MI, U2701A/02A oscilloscopes USB Modular Instruments: Put a bench in your bag Waveform measurement and analysis U2701A/U2702A USB modular two-channel oscilloscopes These USB scopes are available with bandwidths of either 100 MHz (U2701A) or 200 MHz (U2702A). Both provide 500 MSa/s sampling and 16 Mpts of memory per channel (1 GSa/s and 32 Mpts with two channels interleaved) to help you gain better insight into signal details.
USB MI, U2701A/02A oscilloscopes Measure waveforms quickly and easily with the instrumentlike AMM interface. Capture waveforms with capabilities such as edge, pulsewidth and TV triggering. Simplify waveform analysis with automatic measurements such as rise time and duty cycle, and the measurement results panel. Explore frequency domain characteristics of measured waveforms using FFT analysis (with five windowing functions) and search for peak values of the FFT.
USB MI, U2741A DMM USB Modular Instruments: Put a bench in your bag Fundamental measurements with 5½ digits U2741A USB modular digital multimeter The U2741A USB DMM provides a broad range of essential features and 10 measurement functions: DC voltage and DC current; true-RMS AC voltage and AC current; two- and four-wire resistance; frequency; diode test; continuity; and temperature.
USB MI, U2741A DMM Simplify multitasking, or easily view multiple screens at once, with AMM’s “compact” mode. View voltage along with time using the “dual display” mode. Perform data logging for capture and analysis of long-term events.
USB MI, U2761A function generator USB Modular Instruments: Put a bench in your bag Basic signals and arbitrary waveforms U2761A USB modular one-channel function generator The U2761A USB function generator offers eleven standard signals as well as arbitrary waveforms. It relies on direct digital synthesis (DDS) to create stable, accurate output of low-distortion sine waves. The U2761A also provides square waves with fast rise and fall times up to 20 MHz and linear ramps up to 200 kHz.
Visualise modulated waveforms as you define their parameters Generate pulses with variable period, width and amplitude Define or draw your required arbitrary waveform using the waveform editor. 9 Utilize the 11 standard signals as well as arbitrary waveforms.
USB MI, U2722A/U2723A source measure unit USB Modular Instruments: Put a bench in your bag Voltage and current programming and readback U2722A/U2723A USB modular source measure unit The three-channel U2722A and its enhanced version, the U2723A are more than just power supplies – each delivers ±20 V and ±120 mA per channel with fast response time. The U2722A/U2723A also provides voltage and current programming/readback with high-accuracy measurement capabilities.
USB MI, U2722A/U2723A source measure unit Configure all three channels separately to source or measure voltage or current. Combine channels for serial or parallel output. Perform short- and open-circuit testing through the resistance control capability. Use the stepping mode to control U2722A/U2723A outputs (or measurements) as a function of time.
USB MI, U2751A switch matrix USB Modular Instruments: Put a bench in your bag Switching for test automation U2751A USB modular switch matrix The U2751A is a high-quality, low-cost switching solution for complex testing. It has 32 two-wire crosspoints in a 4x8 configuration, enabling connection with any combination of rows and columns—including multiple channels at the same time. Other key features are 45-MHz bandwidth (without terminal block), a relay cycle counter, and a commandlogger function.
USB MI, U2751A switch matrix Create instrument connections by simply clicking at the crosspoints within the visual AMM interface. Implement a variety of test topologies with the U2922A terminal block. 13 Use the built-in relay counter to monitor relay lifetime and performance.
USB DAQ, U2300A MF DAQ USB DAQ: Control, acquire, measure, evolve Basic and high-density DAQ U2300A Series USB modular multifunction DAQ devices This high-performance series consists of four basic models and three high-density models. The basic models feature 16 single-ended/eight differential inputs with 16-bit resolution and ±10 V maximum range.
U2351A Analog Input Resolution Number of channels Maximum sampling rate/ch Scan list memory Analog Output Resolution Number of channels Maximum update rate Function generator mode U2352A U2353A U2354A 16 bits, no missing codes 16 single-ended / 8 differential (software selectable per channel) 250 kSa/s /#1 of channels used 500 kSa/s /#1 of channels used Up to 100 selectable channel entries 16 bits 2 1 MSa/s Sine, square, triangle, sawtooth, and noise Digital I/O Number of channels Compatibility n/a
USB DAQ, U2500A SS DAQ USB DAQ: Control, acquire, measure, evolve Simultaneous signal acquisition U2500A Series USB modular simultaneous-sampling multifunction DAQ devices This family of three high-performance modules provides up to four channels per module with one analog-to-digital converter (ADC) for each channel. Maximum sampling rates are 2 MSa/s/ch in the U2531A (14 bits), 500 kSa/s/ch in the U2542A (16 bits) and 250 kSa/s/ch in the U2541A (16 bits).
U2531A U2541A U2542A Analog Input Resolution 14 bits 16 bits 4 differential input channels Number of channels Maximum sampling rate 2 MSa/s 250 kSa/s Analog Output 12 bits Resolution 2 Number of channels 1 MSa/s Maximum update rate Sine, square, triangle, sawtooth, and noise waveforms Function generator mode Digital I/O 24-bit programmable input/output Number of channels TTL Compatibility General Purpose Digital Timer/Counter (231 – 1) bits Maximum count Number of channels Two indepen
USB DAQ, U2600A DIO USB DAQ: Control, acquire, measure, evolve High channel count digital I/O U2600A Series USB modular isolated digital I/O devices The three U2600A modules offer digital input and output with high channel count and opto-isolation. Virtual port grouping lets you select any eight input or output bits and group them into a single channel as a virtual DIO port. An interrupt function automatically triggers your system when a digital change of state occurs.
U2651A DIO Module U2652A Digital Input Module 32 64 U2653A Digital Output Module Digital Input Number of isolated bits n/a High: 10-24 V; Low: 0-2 V Digital logic levels 1.5 mA per bit Input current (maximum) Digital Output Number of isolated bits Output type 32 64 Open drain power n/a Open drain power MOSFET driver +12 V at 115 mA (typ) +12 V at 260 mA (typ) MOSFET driver General Power consumption Connector type Remote interface +12 V at 235 mA (typ) 100-pin SCSI-II Hi-Speed USB 2.
USB DAQ, U2100A DIO USB DAQ: Control, acquire, measure, evolve Standalone digital I/O U2100A Series USB digital I/O devices This group of three standalone units offers cost-effective DIO for applications such as driving relays, actuators and valves. Equipped with opto-isolation, they can also act as an interface to industrial sensors. Capabilities such as a failsafe watchdog timer and programmable power-up states ensure safe, predictable operation.
U2121A DIO Module U2122A Digital Input Module U2123A Digital Output Module 16 input, 16 output 32 input 32 output Digital I/O Number of lines Input characteristics 0 to 24 V Input voltage < 1.3 V / > 3.5 V Input logic voltage (low/high) n/a 100 μs (opto-isolator) Input propagation delay Output characteristics Output load voltage (maximum) 24 V Output low voltage 1.2 V Output propagation delay 24 V n/a 1.
USB DAQ, U2802A thermocouple interface USB DAQ: Control, acquire, measure, evolve Temperature measurements for thermal analysis U2802A 31-channel thermocouple input module The Agilent U2802A thermocouple input module is a signal conditioner that converts low-voltage thermocouple signals into a ±10 volt signal range. The module is designed to be used with the U2355A and U2356A multifunction DAQ modules, connected through two SCSI-II cables.
USB DAQ, U2802A thermocouple interface Monitor temperature measurements using the AMM interface.
U2781A chassis On the bench and on the go On the bench: Integration made easy U2781A USB modular product chassis The U2781A is a six-slot chassis for Agilent USB modular instruments and data acquisition devices. It offers the convenience of one AC-power connection and a single USB link. Modules are hot-swappable and the auto-detection feature reduces setup time and effort.
When you’re on the road, a few essential “survival kit” items may reduce weight and eliminate hassles. You should be able to find these at electronics stores (and some music stores) that carry computer accessories and power adapters. USB hub: Most laptop PCs have just two USB ports, and many people use one for a wireless mouse. To connect more than one USB modular instrument, you’ll need a multiport USB 2.0 hub and an extra USB cable to connect the hub to your PC.
Software & related literature Software & related literature Refine your design—sooner Agilent VEE Pro and VEE Express Agilent VEE Pro 9.0 is intuitive graphical test & measurement software that provides a quick and easy path to measurement and analysis. It creates flexible, intuitive block diagrams for better instrument control and reduces test development time through greater efficiency. Agilent VEE Pro lets you focus on your measurements rather than spending time on programming and connections.
A variety of DAQ- and MI-related application notes can be downloaded from www.agilent.com.
www.agilent.com www.agilent.com/find/usbmodular www.agilent.com/find/usbdaq Easily arrange and rearrange your tests One day you’re working on the bench and the next you’re working offsite. With Agilent’s growing family of USB-based modular instruments, you can assemble a small system in a compact chassis or carry two or three essential instruments in your briefcase along with a laptop PC.