User manual

42 U2300A Series DAQ Service Guide
3 Dismantle Procedures
General Disassemble
This chapter provides the step- by- step guides on how to
dismantle the module and install the replacement assembly. To
assemble back the module, follow the instructions in reverse
order.
The removable assemblies include:
• Plastic casing
• Metal casing
• Rear metal casing
• Front metal casing, which is attached to the carrier board
and measurement board
Mechanical Disassemble
Follow the instructions in this section for the instrument
disassemble process.
Step 1: Pull the bumper out to remove the plastic casing.
NOTE
The parts shown in the following figures are representative and
may look different than what you have in your module.
Plastic casing