User manual

6 Quick Start Guide — Using MATLAB with Agilent U2300A DAQ Devices
Installing the U2300A Series IVI-COM drivers
1 Click Software Driver > IVI-COM to begin the installation.
2 Select the U2300A Series check box. Click Install to begin the
installation. Follow the instructions on the screen to proceed with the
installation.
3 Click Finish when the installation has completed.
NOTE
• Ensure that you have completed the steps for “Installing the U2300A
Series hardware drivers” on page 4 before you proceed.
• The IVI Shared Components must also be installed prior to installing
the IVI-COM driver. Find the IVI Shared Components at the IVI web site
here: http://www.ivifoundation.org.
• If needed, the IVI-COM driver may also be downloaded from
http://www.agilent.com/find/ivi-com.