User manual

4 Quick Start Guide — Using MATLAB with Agilent U2300A DAQ Devices
Follow the instructions below to install the software components:
Installing MATLAB and MATLAB’s Data Acquisition Toolbox
1 You can install the MATLAB software directly from the MATLAB
installation DVD or from the MathWorks web site. (A MathWorks
account is required.) If you do not already have MATLAB and
MATLAB’s Data Acquisition Toolbox, you can request a trial at:
http://www.mathworks.com/agilent/daq/tryit.html.
2 Follow the on- screen prompts to install MATLAB and this toolbox.
Installing the U2300A Series hardware drivers
1 Verify that your PC meets the minimum system requirements as stated
in “Minimum system requirements” on page 3.
2 Insert the Agilent USB Modular Products Product Reference CD- ROM.
The application automatically loads the “Agilent Modular Products
Installation Menu” as shown.
3 Click Hardware Driver to begin the installation. Click Next to proceed.
Follow the instructions on the screen to proceed with the installation.
NOTE
Please ensure that there are no instruments connected to the PC when
installing the driver.