User manual
Quick Start Guide — Using MATLAB with Agilent U2300A DAQ Devices 11
4 Verify Your Module Connection
The Agilent Connection Expert is one of the utilities of the Agilent IO
Libraries Suite. The Connection Expert configures the connected
instruments and enables communication. It is able to automatically detect
the U2300A Series USB multifunction data acquisition devices plugged into
the PC.
1 Go to Start > All Programs > Agilent IO Libraries Suite > Agilent Connection
Expert to launch the Connection Expert.
2 The detected USB multifunction DAQ device will be visible on the
Instrument I/O on this PC explorer pane. Right- click on the USB
multifunction DAQ device instrument on the explorer pane.
3 A context menu will appear. Select Send Commands To This Instrument.
4 The Agilent Interactive IO dialog box will appear. Click Send & Read to
send the *IDN? default command. The instrument response should
appear in the Instrument Session History panel.
NOTE
Repeat this verification for all applicable modules connected to your PC.