User manual

Quick Start Guide — Using MATLAB with Agilent U2300A DAQ Devices 9
4 Select Install the software automatically (Recommended) and click Next.
5 A warning message will appear on the Hardware Installation window.
Click Continue Anyway to proceed with the installation of the USB
multifunction DAQ device.
NOTE
If you do not wish to receive similar warning messages in the future,
follow the instructions below.
1 Go to Start > Control Panel and double-click System.
2 Select the Hardware tab and click Driver Signing on the Drivers panel.
3 The Driver Signing Options dialog box will appear.
4 Select Ignore to disable the warning message.