User manual

3Setup Options
Setup Menu Summary
52 U1731C/U1732C/U1733C User’s Guide
Setup Menu Summary
The Setup menu items are summarized in the table below.
Click the respective “Learn more” pages for more
information on each menu item.
Table 3 - 2 Setup menu item descriptions
Legend Available settings Description Learn more on:
Ai, Z, L, C, R, ESR, or DCR
Set the measurement type that the LCR meter powers up
in. Default is the auto identification (Ai) mode.
page 54
100 Hz, 120 Hz, 1 kHz,
10 kHz, or 100 kHz
Set the test frequency that the LCR meter powers up in.
Default is 1 kHz.
page 56
D, Q, or θ and P or S
Set the inductance (L) secondary parameter and
measurement mode that the LCR meter powers up in.
Default is quality factor (Q) and series (S).
page 57
D, Q, or θ and P or S
Set the capacitance (C) secondary parameter and
measurement mode that the LCR meter powers up in.
Default is dissipation factor (D) and series (S).
page 58
D, Q, or θ and P or S
Set the resistance (R) secondary parameter and
measurement mode that the LCR meter powers up in.
Default is phase angle (θ) and series (S).
page 59
FACt or USEr
Set the open/short correction mode that the LCR meter
powers up in. Default is factory (FACt).
page 60
05° to 45
°
Set the phase angle condition for the auto identification
(Ai) mode. Default is 10
°.
page 61
Ft01 to Ft16 or Ur01 to Ur16
Set the limit category (factory or user) and set (01 to 16)
that the LCR meter powers up in. Default is Ft01.
page 63