User manual

Characteristics and Specifications 4
SMD Tweezer Specifications
U1731C/U1732C/U1733C User’s Guide 85
SMD Tweezer Specifications
The Agilent U1782A is a tweezer to be used with the
U1700 Series Handheld LCR Meters. This tweezer is useful
when measuring SMD- type components. For better noise
immunity, the tweezer has a GUARD end to be connected to
the LCR meter’s GUARD terminal.
It is recommended to measure the SMD components length
as well as the maximum opening of the tweezers. The
tweezers have one red, one black, and one green 4 mm
shrouded plugs, which are connected to the LCR meter's +,
–, and GUARD ends, respectively. The length of the tweezer
is approximately 770 mm (30.3 inches) (see Figure 4- 1).
Figure 4-1 U1782A SMD tweezer
770 ± 20 mm
150 mm
8.4 mm
107 mm
Green (GUARD)
Red ( + )
Black ( – )