Datasheet

ManualsBrandsKEYSIGHT TECHNOLOGIES ManualsTest & MeasurementCurrent clamp, Handheld multimeter digital U1212A CAT III 1000 V, CAT IV 600 V Display (counts):

Agilent U1210 Series Handheld

Clamp Meters

Handle big currents – more safely

Data Sheet

Features

• Large clamp opening of

52 mm or 2 inches

• High measurement capability

of up to 1000 A for AC, DC or

AC+DC

• CAT III 1000 V/CAT IV 600 V

safety rating

• Includes full-featured DMM

with resistance, capacitance,

frequency and temperature

functions

• High resolution measurements

– measure current as low as

0.01 A

• Peak hold

• Dual ranging mode – manual

and auto

• Large dual display

• Min/max recording capability

Measurements of electrical distribution cables can be challenging and

risky. For cables up to two inches in diameter, the Agilent U1210 Series

handheld clamp meters enable high-current measurements without

breaking the circuit. Unlike most clamp meters, they also include DMM

capabilities—resistance, capacitance, frequency and temperature—to

simplify troubleshooting during installation and maintenance. Best of all,

they provide an extra layer of protection with CAT IV 600V and CAT III

1000 V safety ratings.

Summary of content (16 pages)

PAGE 1
Agilent U1210 Series Handheld Clamp Meters Handle big currents – more safely Data Sheet Features • Large clamp opening of 52 mm or 2 inches • High measurement capability of up to 1000 A for AC, DC or AC+DC • CAT III 1000 V/CAT IV 600 V safety rating • Includes full-featured DMM with resistance, capacitance, frequency and temperature functions • High resolution measurements – measure current as low as 0.
PAGE 2
Key Measurements Measure current easily and accurately Agilent U1210 Series handheld clamp meters come with clamp opening of 52 mm/2 inches and high current measurement capability of up to 1000 A (AC, DC, AC+ DC). With the large jaw size, these handhelds simplify current measurements for thick cables. Clamp on with the U1210 Series and get convenience, versatility and the ability to handle big currents—safely.
PAGE 3
Take a Closer Look Large jaw opening of 2 inches to test thick current sources Capacitance/Diode measurement Max or Min recording capability Temperature and audible continuity functions High measurement capability of up to 1000 A for AC, DC or AC+DC Large LCD display with maximum reading of 4000 counts Peak hold function for in-rush current testing Manual or auto ranging 3
PAGE 4
General Specifications Title Specification Dimension • U1211A: 106 mm (W) X 273 mm (L) X 43 mm (H) • U1212A and U1213A: 106 mm (W) X 260 mm (L) X 43 mm (H) Net Weight • U1211A: 625 grams with batteries included • U1212A and U1213A: 525 grams with batteries included Display 4 digits with maximum reading 4,100 counts. The 12 Segments analog bar graph and full annunciator. Automatic polarity indication. Battery Standard 9 V Battery - Alkaline Low battery indicator Battery voltage drops below 6.
PAGE 5
Electrical Specifications for U1211A Accuracy is given as ± (% of reading + number of least significant digits) at 23 °C ± 5 °C, with relative humidity less than 80 % R.H. ACV/ ACA specifications are ac coupled, true R.M.S. and are valid from 5 % of range to 100 % of range. The crest factor may be up to 3.0 at full-scale except the 1000 V and 1000 A ranges where these are 1.5 at full scale. For non-sinusoidal waveforms, add (2 % reading + 2 % full scale) typical, for crest factors up to 3.
PAGE 6
Electrical Specifications for U1211A (continued) Capacitance • Range Resolution Accuracy Overload protection 400 µF 0.1 µF 2%+4 4000 µF 1 µF 3%+4 1000 V R.M.S. for circuits < 0.3 A of short circuit current The accuracy is based on film capacitor or better and use Relative mode to zero residual value AC current Range Resolution Accuracy *N1 45~65 Hz 65~400 Hz 400 Hz~1 kHz 40 A 0.01 A 1.0 % + 10 1.0 % + 10 3.0 % + 10 400 A 0.1 A 1.0 % + 5 1.0 % + 5 3.0 % + 5 400~700 A 1A 1.
PAGE 7
Electrical Specifications for U1211A (continued) Frequency (AC coupling) • Range Resolution 99.99 Hz 0.01 Hz 999.9 Hz 0.1 Hz 9.999 kHz 0.001 kHz 99.99 kHz 0.01 kHz 999.9 kHz 0.1 kHz Accuracy Minimum frequency 0.2 % + 3 10 Hz Overload protection: 1000 V; < 20,000,000 V x Hz Sensitivity Frequency sensitivity Range Maximum input for specified accuracy of AC Minimum sensitivity (R.M.S.
PAGE 8
Electrical Specifications for U1212A Accuracy is given as ± (% of reading + number of least significant digits) at 23 °C ± 5 °C, with relative humidity less than 80 % R.H. ACV/ ACA specifications are ac coupled, true R.M.S. and are valid from 5 % of range to 100 % of range. The crest factor may be up to 3.0 at full-scale except the 1000 V and 1000 A ranges where these are 1.5 at full scale. For non-sinusoidal waveforms, add (2 % reading + 2 % full scale) typical, for crest factors up to 3.
PAGE 9
Electrical Specifications for U1212A (continued) Capacitance Range Resolution Accuracy Overload protection 400 µF 0.1 µF 2%+4 4000 µF 1 µF 3%+4 1000 V R.M.S. for circuits < 0.3 A of short circuit current • The accuracy is based on film capacitor or better and use Relative mode to zero residual value DC current Range Resolution Accuracy 40 A 0.01 A 1.5 % + 15 400 A 0.1 A 1.5 % + 3 1000 A 1A 2.0 % + 5 • Maximum overload 1000 A R.M.S.
PAGE 10
Electrical Specifications for U1212A (continued) Frequency (AC coupling) • Range Resolution 99.99 Hz 0.01 Hz 999.9 Hz 0.1 Hz 9.999 kHz 0.001 kHz 99.99 kHz 0.01 kHz 999.9 kHz 0.1 kHz Accuracy Minimum frequency 0.2 % + 3 10 Hz Overload protection: 1000 V Sensitivity Frequency sensitivity Range Maximum input for specified accuracy of AC Minimum sensitivity (R.M.S.
PAGE 11
Electrical Specifications for U1213A Accuracy is given as ± (% of reading + number of least significant digits) at 23 °C ± 5 °C, with relative humidity less than 80 % R.H. AC voltage, AC current, AC+DC voltage, AC+DC current specifications are ac coupled, true R.M.S. and are valid from 5 % of range to 100 % of range. The crest factor may be up to 3.0 at full-scale except the 1000 V and 1000 A ranges where these are 1.5 at full scale.
PAGE 12
Electrical Specifications for U1213A (continued) Diode check/audible continuity test Range Resolution Accuracy Test current Open voltage Diode 0.001 V 0.5 % + 2 Approximately 0.8 mA < +3.1 V • Overload protection: 1000 V R.M.S. for circuits < 0.3 A of short circuit current • Built-in buzzer sounds when reading is below 50 mV approximately and single tone for normal forward-biased diode or semiconductor junction as 0.3 V ≤ Reading ≤ 0.
PAGE 13
Electrical Specifications for U1213A (continued) AC current Range Resolution Accuracy *N1 45~65 Hz 40 A 0.01 A 2.0 % + 10 3.0 % + 10 400 A 0.1 A 2.0 % + 5 3.0 % + 5 1000 A 1A 2.0 % + 5 3.0 % + 5 • 65 Hz~1 KHz Maximum overload 1000 A R.M.S. N1: The maximum verification of current and frequency product is less than 400,000 A x Hz AC+DC current Accuracy 45~65 Hz Range Resolution 65 Hz~1 kHz 40 A 0.01 A 3.5 % + 25 4.5 % + 25 400 A 0.1 A 3.5 % + 9 4.5 % + 9 1000 A 1A 4.
PAGE 14
Electrical Specifications for U1213A (continued) Frequency (AC coupling) • Range Resolution 99.99 Hz 0.01 Hz 999.9 Hz 0.1 Hz 9.999 kHz 0.001 kHz 99.99 kHz 0.01 kHz 999.9 kHz 0.1 kHz Accuracy Minimum frequency 0.2 % + 3 10 Hz Overload protection: 1000 V; < 20,000,000 V x Hz Sensitivity Frequency sensitivity Range Maximum input for specified accuracy of AC Minimum sensitivity (R.M.S.) 45 Hz~2 kHz 10 Hz~200 kHz 4V 0.3 V 0.
PAGE 15
Ordering Information Standard shipped accessories • • • • • Test leads 4-mm probes Soft carrying case Quick Start Guide Certificate of Calibration (CoC) Optional accessories U1168A Standard test lead kit U1162A Alligator clips U1175A Soft carrying case U1186A K-type thermocouple and adapter Did you know? Ensure that the clamp meter measures only one conductor at a time.
PAGE 16
www.agilent.com www.agilent.com/find/clampmeter For more information on Agilent Technologies’ products, applications or services, please contact your local Agilent office. The complete list is available at: Agilent Email Updates www.agilent.com/find/emailupdates Get the latest information on the products and applications you select. www.lxistandard.org LAN eXtensions for Instruments puts the power of Ethernet and the Web inside your test systems. Agilent is a founding member of the LXI consortium.