Manualshelf

User manual

ManualsBrandsKEYSIGHT TECHNOLOGIES ManualsTest & MeasurementCurrent clamp, Handheld multimeter digital CAT III 600 V, CAT IV 300 V Display (counts):
80818283848586878889
4 Characteristics and Specifications
Electrical Specifications
66 U1190A Series User’s Guide
Electrical Specifications
DC specifications
NOTE
Specification assumptions are given on page 64.
Table 4 - 1 DC specifications
Function Range Resolution
Accuracy Test current
Open
voltage
U1191A U1192A U1193A U1194A (where applicable)
Voltage
60.00 V 0.01 V - 0.5% + 3 0.5% + 3 0.5% + 3 - -
600.0 V 0.1 V 0.5% + 3 0.5% + 3 0.5% + 3 0.5% + 3 - -
Notes for DC voltage specifications:
1 Overload protection: 600 Vdc.
2 Input impedance: 10 M (nominal) in parallel with <100 pF
Resistance
600.0 0.1 0.8% + 5 0.8% + 5 0.8% + 5 0.8% + 5 95 A1.4 V
6.000 k 0.001 k 0.8% + 3 0.8% + 3 0.8% + 3 0.8% + 3 95 A1.4 V
60.00 k 0.01 k - 0.8% + 3 0.8% + 3 0.8% + 3 95 A0.7 V
Notes for resistance specifications:
1 Overload protection: 600 Vrms for short circuits with <0.1 mA current
2 Maximum open voltage is <1.4 V
3 The accuracy is specified after the Null function is used to subtract the test lead resistance and thermal effect (by shorting
the test leads).
U119XA UG.book Page 66 Thursday, September 15, 2011 4:03 PM