User manual

Clamp Meter Features 3
Detecting AC Voltage Presence (Vsense)
U1190A Series User’s Guide 55
Press to toggle the Vsense detector’s sensitivity between
Hi.SE (high sensitivity) or Lo.SE (low sensitivity).
Figure 3-1 Vsense (high sensitivity) display
Figure 3-2 Vsense (low sensitivity) display
NOTE
• Place the top of the clamp meter close to a conductor when sensing for
AC voltages (as low as 24 V in the Hi.SE setting).
• The low sensitivity setting can be used on flush mounted wall sockets
or outlets and various power strips or cords.
• The high sensitivity setting allows for AC voltage sensing on other
styles of recessed power connectors or sockets where the actual AC
voltage is recessed within the connector itself.
U119XA UG.book Page 55 Thursday, September 15, 2011 4:03 PM