Manualshelf

User manual

ManualsBrandsKEYSIGHT TECHNOLOGIES ManualsTest & MeasurementCurrent clamp, Handheld multimeter digital CAT III 600 V, CAT IV 300 V Display (counts):
12345678910
VI U1190A Series User’s Guide
Environmental Conditions
This instrument is designed for indoor use and in an area with low
condensation. The table below shows the general environmental
requirements for this instrument.
Environmental conditions Requirements
Operating temperature –10 °C to 50 °C
Operating humidity
Up to 80% RH (relative humidity) for temperature
up to 30 °C, decreasing linearly to 50% RH at
50 °C
Storage temperature
–40 °C to 60 °C, 40% to 80% RH (without
batteries)
Altitude Up to 2000 meters
Pollution degree Pollution degree 2
NOTE
The U1190A Series Handheld Clamp Meter complies with the following safety and
EMC requirements:
• IEC 61010-1:2001/EN 61010-1:2001
• IEC 61010-2-032:2002/EN 61010-2-032:2002
• CAN/CSA-C22.2 No. 61010-1-04
• CAN/CSA-C22.2 No. 61010-2-032-04
• ANSI/UL Std. No. 61010-1:2004
• IEC61326-1:2005/EN61326-1:2006
• Canada: ICES/NMB-001: Issue 4, June 2006
• Australia/New Zealand: AS/NZS CISPR 11:2004
U119XA UG.book Page VI Thursday, September 15, 2011 4:03 PM