User manual

E5810B Web Access 3
Other Web Access Functions
E5810B User’s Guide 79
9 Verify the firmware revision.
When the E5810B is successfully rebooted, verify that the
firmware has been downloaded successfully by displaying
the E5810B Welcome page and verify that the firmware
revision number shows the correct version of the
firmware.
Troubleshooting guidelines
The E5810B records information on the firmware update
process in a system log that is viewable through the E5810B
Web access or through the E5810B Telnet interface.
1 View the system log from the E5810B Web access.
To view the system log information on the E5810B Web
access, on your Web browser address line, type:
http://<IP Address>/systemLog.htm where
<IP Address> is the IP address displayed on the E5810B
front panel display and select Enter to display the system
log. After a successful firmware update, the E5810B
systems log should show normal startup messages as
shown below.
(00:00:00.00) Selftest Passed
(00:00:00.00) Searching for DHCP Server
(00:00:00.00) GPIB initialized with name : [gpib0]
(00:00:00.00) RS232 initialized with name : [COM1]
(00:00:00.00) USB initialized with name : [usb0]