User manual

E5810B Web Access 3
Other Web Access Functions
E5810B User’s Guide 75
4 Perform firmware update.
i Select Update Firmware to display the password dialog
box. Select OK to confirm the update and the E5810B
will attempt to download the firmware from the
FTP site.
ii After you have confirmed the update, the E5810B front
panel should display the Updating firmware… message.
iii The LAN LED should flash, indicating LAN activity is
taking place. The firmware for the E5810B is
approximately 12 MB and downloading time may vary,
depending on network connections.
iv After the firmware image has been downloaded into
the E5810B, the E5810B will automatically reboot and
display the Rebooting E5810B... message. The E5810B will
then begin a normal startup sequence.
5 Verify the firmware revision.
When the E5810B is successfully rebooted, verify that the
firmware has been downloaded successfully by displaying
the E5810B Welcome page and verify that the firmware
revision number shows the correct version of the
firmware.
Agilent FTP site is not accessible from the E5810B
1 Acquire an image of the E5810B firmware.
If the Agilent FTP site is not accessible from the E5810B,
you may still be able to get the image from your Web
browser. You may need to set up an FTP proxy on your
Web browser.
i On your Web browser, type
ftp://ftp.agilent.com/pub/e5810/e5810b/ to connect you
to the Agilent FTP server. This page displays the files
associated with the E5810B.
ii Select the file e5810_B_latest_frimware.hex and save it.
For example, in the Internet Explorer, right- click the
file and select Copy to Folder. Other Web browsers may
have a different sequence.