User manual

E5810B Web Access 3
Viewing and Modifying the E5810B Configuration
E5810B User’s Guide 51
Modifying the E5810B configuration
Select Modify Configuration from the Current Configuration of
E5810B LAN/GPIB/USB Gateway page to modify the E5810B
configuration as shown in Figure 3- 6. You will be prompted
to enter the E5810B password. The default password is
E5810. The Configuring your E5810B LAN/GPIB/USB
Gateway page is displayed as shown in Figure 3- 7.
Figure 3-7 Configuring your E5810B LAN/GPIB/USB Gateway page
You can configure the E5810B settings to your desired
parameters by typing or selecting the new value in the Edit
Configuration column. Select Save and Reboot E5810B at the top
or the bottom of the page to save the settings.