User manual

Installing the E5810B 2
Installing and Configuring Agilent IO Libraries Suite
E5810B User’s Guide 35
Configuring a remote GPIB interface
1 Launch Agilent Connection Expert from the Start menu or the
Start Screen (Windows 8).
2 Select Add interface on the Agilent Connection Expert toolbar.
3 In the Manually Add an Interface dialog box, select
Remote GPIB.
4 Select Add to display the Remote GPIB interface dialog
box as shown in Figure 2- 10.
Figure 2-10 Remote GPIB interface dialog box
5 If the E5810B is in the subnet as the PC, select Find
Interfaces... to locate and add the remote GPIB interface.
6 If the E5810B is on a different subnet from the PC, enter
the hostname or the IP address displayed on the E5810B
front panel display.