User manual

A Using the Telnet Utility
Telnet commands for E5810B
116 E5810B User’s Guide
gpib-unit <2-255> View/Set the GPIB Logical Unit Number
rs232-name <string*15> View/Set the RS-232 SICL Interface Name
rs232-baud
<300|1200|2400|4800|9600|19200|384
00|57600|115200>
View/Set Baud
rs232-bits <5|6|7|8> View/Set number of RS-232 data Bits
rs232-stopbits <1|2> View/Set number of RS-232 Stop Bits
rs232-parity
<NONE|EVEN|ODD|MARK|SPACE>
View/Set the RS-232 Parity
rs232-flow <NONE|XON|RTS|DTR> View/Set the RS-232 Flow Control
rs232-srq <RI|DSR|DCD|CTS> View/Set the RS-232 SRQ Line
usb-name <string*15> View/Set the USB SICL Interface name
status View the LAN/GPIB Gateway Connection Status
syslog-display View Contents of the Syslog
syslog-clear Clear the Syslog
password Enter the password (when prompted)
(Password is required when making changes)
changepassword Change the Password (when prompted)
restart Save Configuration and Reboot E5810B
factory-reset Reset Config to Factory Defaults and Reboot
exit Exit WITHOUT Saving Configuration (see restart)
quit Exit WITHOUT Saving Configuration (see restart)
bye Exit WITHOUT Saving Configuration (see restart)
Tabl e A-1 Telnet commands (continued)
Command Description