User manual

Chapter 4 Remote Interface Reference

Calibration Commands

Note When you calibrate the power supply, you should not set the OVP and OCP to ON

state in order to prevent OVP or OCP from tripping.

CALibration:COUNt?

CALibration:CURRent[:DATA] <numeric value>

CAL:CURR:LEV

MIN

CAL:CURR:LEV MID CAL:CURR:LEV MAX

CALibration:CURRent:LEVel {MINimum | MIDdle|MAXimum}

CAL:CURR

CALibration:CURRent:PROTection