User manual

Chapter 4 Remote Interface Reference
An Introduction to the SCPI Language
104
Querying Parameter Settings
CURR 5
CURR?
CURR? MAX
CURR? MIN
Caution If you send two query commands without reading the response from the first, and then
attempt to read the second response, you may receive some data from the first response
followed by the complete second response. To avoid this, do not send a query
command without reading the response. When you cannot avoid this situation, send
a device clear before sending the second query command.
SCPI Command Terminators
IEEE-488.2 Common Commands
*RST; *CLS; *ESE 32; *OPC?